-495-p.jpg?v=508aca22-9022-4880-8019-a7370e1210d8)
-495-p.jpg?v=508aca22-9022-4880-8019-a7370e1210d8)
-495-p.jpg?v=508aca22-9022-4880-8019-a7370e1210d8)
ORIGINAL STORMTROOPER
[ ANH 1976 REPLICA]
(Signature Edition)
Our ready-to-wear armour is expertly made and the most authentic set available. Cast from 'A New Hope' legacy moulds this armour maintains an incredible level of detail. Andrew Ainsworth and his team have used modern thermoplastics and time tested techniques to produce a set of armour that looks great on a mannequin and can be worn for active trooping.
[DETAILS]
- HD Gloss Acrylic Capped ABS
- Custom fabricated composite material with HD Gloss Acrylic outer layer with a white flexible ABS backing able to withstand the wear and tear of costuming events. So, you get the best performance out of both materials.
- Strong enough to withstand the rigours of costuming too!
- Ready-to-wear straight out of the box.
- Professional ‘popper’ integrated strap system.
- Accommodates various body dimensions – typically 5’6 to 6’2 (165-185cm) with various builds.
- Can be adapted for people outside these core dimensions
[HELMET] (Options)
- Hero Helmet (Signature Edition) (Default)
- Stunt Helmet (Signature Edition) (Option)
- Certificate of Authenticity
- Display Stand with a serial numbered plaque
- Hemet Signed by Andrew Ainsworth (inside)
[E11 Collector Edition] (Default)
- Super-accurate barrel and stock
- Removeable targeting sensors
- Unique serial number
- Attention to detail throughout
- Scope and accurate casting from an original
- Original Sterling patent numbers clearly visible
- Removable power pack
- Weighs just 700g (25oz) – ideal for trooping.
- Certificate of Authenticity
- Special edition packaging
- E11 Blaster display stand
[E11 Standard Blaster] (Option)
- As Above with no E11 Blaster display stand
[E11 Cosplay Edition] (Option)
- Cosplay safe foam rubber construction
- Interchangeable Orange and Black barrel end
- Unique serial number
- Attention to detail throughout
- Weighs just 650g – ideal for trooping.
- Certificate of Authenticity
[E11 Holster] (Option)
- Real Leather
[BOOTS] (Option)
- Quality Leather
- Real Stitch Rand around the boot (not moulded into sole)
- Composite Leather EVA Sole
- Very comfortable
- Lightweight
- Flexible boot sole
- Perfect for those long days trooping.
[ARMOUR] (Default) (Signature Edition)
- Shoulder Strap Left
- Shoulder Strap Right
- Shoulder Bell Left
- Shoulder Bell Right
- Chest + signed by Andrew Ainsworth (inside)
- Upper Back
- Abdominal front
- Abdominal back
- Bottom
- Upper Arm Left
- Upper Arm Right
- Forearm Left
- Forearm Right
- Thigh Left
- Thigh Right
- Calf left
- Calf Right
- Acrylic Capped Belt + Utility Packs
- Thermal Detonator with metal clips
- Gloves with Hand Plates
- Undersuit (Bodysuit)
- A fully integrated strap system
[TECHNICAL]
(Shipping Box Dimensions)
- Helmet Box: 33cm x 33cm x 33cm
- ArmourBox : 58cm x 48cm x 41cm
- E11 Collector Edition Box: 53cm x 32cm x13cm
- E11 Standard Blaster Box: 53cm x 32cm x13cm
- E11 Cosplay Edition Box@(Fits into Armour box)
- Boots Box: 38cm x 25cm x13cm
Customer reviews
I purchased this combo deal and it was the best purchase I have made close to ever. I was impressed from the very beginning at the care that was put into protecting the armor and as I unwrapped each piece it kept getting better. This armor is wearable straight out of the box minus the shoes and easier to put on than any other trooper armor I have seen.
I was speechless when I put it on, and I knew it wasn't just me when I left the hotel room for the 2016 Dallas Comic Con and had roughly 116 pictures taken of me before I even walked through the convention center door. Over the course of the 3 day convention I had easily over 1500 plus pictures taken of me in this armor, I even made it into 2 wedding photo shoots that were being held at the hotel. If you are wondering weather you should buy this armor or somebody else's armor, Go no further, just buy this one and know that you just bought the best in the market. I am 6 feet tall exactly and weigh about 195 and this armor fit perfectly. You can see that it easily could be adjusted to somebody taller or shorter due to the placement of the adjustment straps.
To Andrew and Shepperton Studios, hats off to you, this was amazing work and thank you for build me such a fine piece of Star Wars history.
Mike
Michael | United Kingdom | June 2016
| Product Code | S0053U |
| Weight | 35kg |
